Anti-Corrosion Coating
Zinc primers
Epoxy surface tolerant coating, Epoxy intermediate coating & Epoxy finish
Coal Tar Epoxy Coating
Polyurethane Top Coats
Heat Resistant Coating
Zinc primers
| CLEAN TECH ZP Primer (Epoxy Zinc Phosphate Primer) | An epoxy Zinc Phosphate primer which is two pack epoxy primer with excellent adhesion to metals and concrete substrates. It can be used as coating for mild to moderately corrosive environment on walls & steel structures. It has good adhesion to substrate and has good chemical resistance. Very good adhesion on steel and concrete surfaces. |
| CLEAN TECH ZS Primer (Inorganic Zinc Silicate Primer) | Due to high metallic zinc content it gives Galvanic Protection of Steel Structures.It achieves Rapid dry to a hard film at low temperature and high humidity allowing early handling of products. It has excellent abrasion resistance |
| CLEAN TECH ZR Primer (Epoxy Zinc rich primer) | Epoxy zinc rich primer coating is recommended for use under corrosive conditions on blast cleaned surfaces and designed as a system primer in various paint systems. It dries fast and is superior to conventional epoxy primers. |
| CLEAN TECH ZREP Primer (Two pack zinc rich epoxy primer) | It is an epoxy zinc rich primer fortified with zinc. |
Epoxy surface tolerant coating, Epoxy intermediate coating & Epoxy finish
| CORRO TECH GP(M) | Two component primer-cum-high build epoxy coating having excellent resistance to corrosion for structures in normal offshore and high humidity areas (C5-I & M as per ISO-12944). Ideal coating system for substrates with compromised surface preparation. Easy to apply. Salt Fog Resistance -10000 hrs, no failure as per ASTM B117. High end system with semi-glossy finish. |
| CORRO TECH ST 90 (Surface Tolerant Epoxy) | A Two component Self Priming Surface Tolerant high build epoxy primer based on modified epoxy and poly amino amine adduct with inert Aluminum powder having resistance to corrosion for normal and Offshore structures. It is surface tolerant, it has good adhesion and performance properties even on poorly prepared surfaces unlike normal epoxy primers. Economical version .Salt Fog Resistance -3000 hrs., medium range system |
| CORRO TECH ST 82 (Self Priming Surface Tolerant High Build Epoxy Coating) | A Two components high build epoxy surface tolerant self-priming coating on modified epoxy and poly amino amine adduct with inert pigment powder having high resistance to corrosion for normal, industrial, offshore steel and concrete structures. It is surface tolerant and it has good adhesion and performance properties even on poorly prepared surfaces unlike normal epoxy primers. Available in attractive colors. Conforms to EIL specifications F-8 and it approved by EIL. |
| CORRO GUARD HB MIO | This is a two pack high build epoxy polyamide intermediate with micaceous iron oxide pigment. This coating provides an intermediate coat having good resistance against highly corrosive atmosphere and increases the system life |
| CLEAN TECH EPOXY F 310 | A two pack high build polyamide cured epoxy coating with superb performance in Marine and industrial environment. This product conforms to EIL specification F-6B and is approved by EIL. |
| CLEAN TECH SLBC | Economical and user friendly epoxy finish coating, easy to apply, and provide long life compared to conventional enamel. |
Coal Tar Epoxy Coating
| CLEAN TECH CTE 300 (Coal tar epoxy coating) | Two component polyamide cured Coal Tar Epoxy coating, ideally suited for protection of concrete structures, metal, timber and other construction materials in corrosive environment. Having excellent resistant to corrosion for normal, offshore & permanently immersed surface. Ideal product for internal and external surfaces of raw water pipelines, pumping stations, structures etc. |
| CLEAN TECH CTE 200 | A two component high build coal tar epoxy coating having excellent resistance to corrosion for normal, offshore and permanently immersed structures. It is ideally suited for protection of steel & concrete structures, timber and other construction material in corrosive environment |
| CLEAN TECH CTE 400 | A two component solvent free coal tar epoxy coating, ideally suited for protection of concrete structures, metal, timber and other construction materials in corrosive environment. It is having excellent resistant to corrosion for normal, off- shore & permanently immersed surface. Higher film thickness can be achieved in single coat. |
Polyurethane Top Coats
| CLEAN TECH HPEC 1001(J) (high build, elastomeric polyurethane coating) | 100% Solids Two component, high build, Elastomeric Polyurethane coating as per ASTM D 16 Type V. Suitable for Application on both Concrete and Steel surfaces like Splash Zone Areas, Cooling Towers, Pipelines, Tanks, Mounded Bullets etc. Internal lining and external coating for mild steel and ductile iron pipes in water, wastewater, seawater, petroleum and chemical storage services |
| CLEAN TECH PU 60 | A two component aliphatic acrylic polyurethane glossy, non-yellowing top coat finish. It has good gloss retention property. Suitable for application on structures, tank external etc. Resistant to mild chemicals, oils, lubricant spillages. |
| CLEAN TECH PUCM | A two component, high performance aliphatic polyurethane coating. It is an ideal, high solid, protective coating designed to resist UV and weather. It is also a decorative finish coat with high abrasion and chemical resistance. Goes in combination with Corro Tech GP(M) |
| CLEAN TECH PU Super | A higher end aliphatic polyurethane coating. It is an ideal, high solid, protective coating designed to resist UV and weather. It is also a decorative finish coat with high abrasion and chemical resistance. It is recommended for application in harsh chemical environment and permanent immersion conditions. |
Heat Resistant Coating
| CORRO TECH HR 650 (Silicon based Heat resistance coating for Chimneys, Boilers, etc.) | High temp Heat resistant coating designed to withstand temp of 650-700 deg. cent. |
| Chemi Tech 450 HT (Silicon aluminium heat resistant coating up to 450 ° C ) | High performance for protection of metal surfaces from adhesion, film integrity, corrosion and weathering resistance operating at temperatures up to 450˚C |